In stock

MITSUI SEIKI High Precision 5-AXIS Jig Grinder Model 7GAN with Five simultaneous axes motions, ultra-precision accuracy operations provides efficiency grinding exotic materials, fine cermics, carbide and conventional materials that demand jig grinding tolerances. Integrated circuit logic, closed loop, complete electrical equipment for operation on 3-phases 50/60Hz, 200/

Call us
Working Range
Table longitudinal travel (X axis) 1,525 mm
Saddle table transversal travel ( Y axis) 1000 mm
Quill vertical travel (Z axis) 140 mm
Cross rail vertical travel (W axis) 840 mm
Distance between columns 1,600 mm
Max. distance from table surface to grinding spindle nose 0 ~ 1000 mm
Work Table
Work surface 1,850 X 1,200 mm
Nos. of T slots 10 on 106 mm pitch
Rapid feed 5,000 mm/min.
Fine feed 0.1 – 2,000 mm/min.
Permissible load table 2,000 kg  
Spindle Saddle
Rapid feed 5,000 mm/min.
Fine feed 0.1 – 2,000 mm/min.
Cross Rail
Speed of cross rail elevating 790 mm/min.
Main spindle speed 5 – 300 rpm  
Radial adjustment of planetary motion (Fine adjustment) 0 – 500 mm dia.
Min. graduation of radial adjustment on dia. 0.001 mm dia.
Spindle quill vertical travel 140 mm  
Chopping 135mm  
Oscillating speed/25mm (1″) 250 cycle/min
C Axis
Rapid feed 2,600 deg/min.
Fine feed 0.1 – 2,600 deg/min.
Automatic Wheel Infeed
Pre-set data storage 10 sets  
Minimum resolution 0.001mm (on dia.)
Infeed increment 0.001 – 4.000mm (on dia.)
Pre-settable infeed amount 4.000mm (on dia.)
Numbers of cycle/increment 1-99  
Grinding Capacity
Largest hole ground without adapter 100mm dia.    
Largest hole ground with adapter 310mm dia.    
Smallest hole ground 0.5mm dia.    
Taper grinding angle (Standard taper/reverse taper) 0º – 3º    
included angle over full travel of quill
Machine Dimensions
Length X Width X Height(Max.) 4,625 X 3,560 X 3,175mm
Height from floor to table top 1000 mm  
Net weight 13,650 kg  
Power Service Required
Electrical Service 25 KVA (Standard)
Compressed Air
Air pressure 6 kg/cm2(0.59Mpa) or more
Max. air consumption 300NL/min  
CNC Control Unit Fanuc 30i
Minimum Resolution
X, Y and Z axis 0.0001 mm
C axis 0.0005 deg
Z axis 0.0005 mm
Rapid Feed
X and Y axis 5,000mm/min
Z axis 3,000mm/min
C axis 2,600 deg/min
Cutting Feed rate
X and Y axis 0.1 – 2,000 mm/min
Z axis 0.1 – 3,000 mm/min
C axis 0.1 – 2,600 deg/min
Controlled axis 4 axes (X, Y, C and Z)
Simultaneously controlled axis 4 axes  
Least input increment: X, Y and Z axis 0.001 mm  
C axis 0.001 deg.  

Enquire about this product today!

    Other Machine tools available from Kyal

    Find the perfect solution

    What our customers say...

    Superb service from real industrial experts

    We have recently purchased machinery from Kyal Machinetools and have been blown away by the service and attention to detail they have shown.

    Painless, pleasant and hassle-free

    Thanks to Kyal Machine Tools, we've just commissioned our 5th machine! It fits our needs perfectly. Thank you for making it painless, pleasant and most of all hassle-free!